Construction Rating: | starstarstarstarstar |
Flight Rating: | starstarstarstar_borderstar_border |
Overall Rating: | starstarstarstarstar |
Manufacturer: | Excelsior Rocketry |
Skill Level: | 1 |
Style: | Goonybird |
Brief:
Der Goony Max is an inspired bit of lunacy from Excelsior Rocketry, and I guess depending on where you stand on the Goony issue, this series is either genius or a waste of a good Baby Bertha. Speaking as the one-time-owner of an original Goonybird Cloudhopper, I happen to fall on the genius side of the ledger, and to be honest, I can't imagine anyone would fall anywhere else. Der Goony Max is a Baby Bertha-based knock off of Estes legendary pre-political correctness rocket, Der Red Max. Chances are very good that today's litigious climate will keep Estes from ever reissuing Der Red Max, but Excelsior has made it possible to keep the spirit alive with the Goony Max decal set.
Construction:
The kit is built from:
The instructions for the Baby Bertha are as standard as it gets in the non-RTF world of model rocketry. The only change in the Goony Max conversion is to substitute a standard set of Der Red Max fins in place of the Bertha fins. From that point on it's just a matter of paint and decals, neither of which should cause even the least experienced flier to break a sweat. The only mods I made were to glue a 36" of Kevlar shock cord into the top centering ring, swap the stock shock cord out for a longer piece of 1/4" sewing elastic, and attach a 2" x 2" piece of perma wadding. Add a snap swivel to the stock chute and you're ready to fly.
Finishing:
Finishing can be as simple or complicated as you like. I went the standard route using thinned Elmer's Fill 'n' Finish to kill off the tube spirals and balsa grain, then painted the body of the rocket gloss red and the nose cone gloss black. The decals make this project. After spraying them with a coat of protective clear, they were very durable and easy to apply.
Construction Rating: 5 out of 5
Flight:
First flight of the original Goony Max was on a cold but sunny day that happened not to fall on the weekend of a regular club launch. Chan Stevens and I spent the afternoon flying rockets that had not been previously flown for reviewing purposes. One of those I flew was the Goony Max. I was surprised at how high the rocket went on the B6-4, but I shouldn't have been. There is little extra weight in the Baby Bertha to begin with and even the Big Bertha is a decent small field flier on a B6-4. The Goony Max weathercocked some, but this only allowed it to recover closer to the pad.
I threw caution to the wind for the second flight and went with a C6-5. The flight was almost identical to the first with light weathercocking but was noticeably higher. The recovery walk was a bit further as the Max apparently didn't catch a ride back on a lucky breeze. Still it was a very cool flight.
The third flight came just before I was going to apply the decals. I had another rocket that I wanted to fly for a review, so I took the Goony Max along to B6-4 Field just to get it some airtime. Unfortunately it's still getting air. Flying on a B6-4, the Max launched in a spot of dead calm air. The flight was high and straight, but a breeze popped up just as the rocket neared apogee. The breeze grew stronger and was blowing the Max toward the school then died. The rocket drifted down into the waiting arms of one of the rocket eating trees that ring the field. It was only a few feet off the ground, but the tree was on a hillside. This made what should have been a simple matter of reaching up and untangling the parachute completely out of the question. I had planned to return the next day with a long pole, but we got some rain that night so I just started with another of my stash of Baby Berthas. For several weeks the Goony Max just sat there looking more haggard with each passing day, but recently I've noticed that it was gone. Hopefully it has gone to a good home.
Flight Rating: 3 out of 5
Summary:
PROs: Unique Goony design. Cool decals. Great performance from capability all the way up the engine scale. I hadn't put the decals on my first version before it got stuck in a tree.
CONs: My first one got stuck in a tree before I could decal it.
Overall Rating: 5 out of 5
The Goony Max is one of Excelsior Rocketry's "Goony Retro-Bash" line of decal/plan sets. Fred Talasco at Excelsior has created a line of kit bashes that are a throwback to the old Estes "Goonybirds". Fred's designs are based on old Estes kits (in this case the Red Max), and some original ideas which all use the Estes Baby Bertha as the starting point, although there is now a "Fat Max" ...
Cloud Hopper was my second Goonybird clone that I built by kit bashing an Estes Baby Bertha and as a result has an 18mm motor mount instead of the 13mm that the original Cloud Hopper had. Components Components used for this build were one Estes Baby Berha Kit (1261) and the plans ...
Missile Toe was number three in my line of cloned Goonybirds that was built by kit bashing another Baby Bertha kit. As such the plans and decals were downloaded from Ye Old Rocket Plans (http://plans.rocketshoppe.com/estes/est0854/est0854.htm) and used for construction guide. ...
The Sky Shriek was clone number four of the original Goonybirds that I built. And as such is another kit bashed Baby Bertha . The plans were downloaded from http://plans.rocketshoppe.com/estes/est0855/est0855.htm . I then followed these to build the Sky Shriek with the ...
In all fairness I can't do a brief description on this kit as there is a small story behind it. As is normal for me this is not an actual review of the Estes NASA X-15 (0889) [1988-1989]. It is a kit bashed, clone by transition. I came about the idea of doing the X-15 as the G-15 after ...
Zoom Broom was the 1st of my Goonybird clones modified for 18mm motors as a result of being kit bashed from a Baby Bertha. Components Starting with a Baby Bertha kit (EST 1261) that I purchaced at my local Hobby Lobby, all components except the balsa wood and decals were used to ...
Here I go again. For those of you that have followed my Goonyness this was Baby Bertha kit bash #14. Again this is not a kit review of the original Estes Hawkeye (Kit #0873) [1986-1996] It is another of my many kit bashes. All ...
Here I go again. For those of you that have followed my Goonyness this was Baby Bertha kit bash #10. Again this is not a kit review of the original Estes Aries SST (Kit #1927) [1983-1984]. It is another of my many kit bashes. ...
Lucky or unlucky? For those of you that have followed my Goonyness this was Baby Bertha kit bash #13. As such I wanted to play it a little safer with this one so I choose a simpler design. Again this is not a kit review of the original Estes ...
The Goonymarc was number eight in my line of modified Baby Bertha kit bashes. I started with the plans from Jim Z's for the Estes kit #654 with the thought of building the glider version of the Bomarc but ended up with the parachute version (kit #657). All templates and decals for this build ...
One again this is not a kit review of the original NASA Pegasus (Estes Kit #1376) [1982-1986] but another of my many Baby Bertha kit bashes (#12 for those following my Goonyness). All fin patterns and decals came from http://plans.rocketshoppe.com/estes/est1376 ...
The Snarky Jr. (a.k.a. Goony Shark) was kit bash #6 in what was to become a long list of Baby Bertha's that I converted into various Goony Birds and such. The inspiration for this one of course came from my DynaStar's - Snarky and the fact that I wanted to be able to fly it in the smaller ...
The Streamliner was the fifth in a series of Baby Bertha kit bashes that I did while building my Goonybird fleet. The first four kits were used to make four of the original Goonybirds from Estes but now it was time for somthing a little different. I remember seeing this model in a&n ...
For those of you still following my Goonyness this was Baby Bertha kit bash #11. Again this is not a kit review of the original but another of my many kit bashes. All fin patterns and decals came from http://www.spacemodeling.org/JimZ/est0806.htm . The major ...
For those of you following my Goonyness this is Baby Bertha kit bash #9. So OK this is not a kit review so much as it's actually another of my kit bashes. All fin patterns and decals came from http://www.spacemodeling.org/JimZ/estes/est1909.pdf . The main ...
This is my Mo' Skeeter, a 320% upscale of the classic Estes Mosquito . It's a rear-ejection model, which avoids the visible nose cone line that most Mosquito upscales suffer from. Components This rocket consists of a Baby Bertha cone , 6" of BT-60, 6" of BT-20, two 20-60 ...
It all started one day after I opened a Baby Bertha kit and found that the motor mount had the wrong size adaptor rings. The rings were for a BT-50 and not a BT-20. I thought about replacing the rings with a correct set, but then the creative juices started to flow, what could I do with this ...
This is a kit bash of a Baby Bertha that transforms a mild mannered rocket into mean, green, flying machine--the BioHazard. Modifications: One challenge was the tight fit of three 18mm motor mount tubes inside the BT-60 body tube. The 3 tubes were glued together and the inside "hole" was ...
This is a Goonie of one my favorite classic boost gliders, the Sky Dart. The Sky Goon starts as a Baby Bertha and adds wings, stabilizer and engine pod. Modifications: The rear of the nose cone is removed, leaving about 1/2" of shoulder which is glued to the body. The engine mount is built ...
I chose to build the Streamliner for this contest as it truly spoke to me as something I could do--that doesn't happen often. This rocket started out as an Estes Baby Bertha kit. In order to create the "Streamliner", I cut a wedge shaped section out of the body tube starting just below where ...
Sponsored Ads