Construction Rating: | starstarstarstarstar_border |
Flight Rating: | starstarstarstarstar_border |
Overall Rating: | starstarstarstarstar_border |
Published: | 2010-05-11 |
Diameter: | 1.64 inches |
Length: | 21.40 inches |
Manufacturer: | Estes |
Skill Level: | 1 |
Style: | Scale |
Brief:
A semi-scale model of the US Army anti-missile missile.
A friend of mine said no Estes rocket built stock can survive more than twelve flights. I decided to prove him
wrong with this kit.
Construction:
Instructions were straight-forward and easy to follow. I built this rocket completely stock and had no problems. I recommend adding all the glue fillets to the cardboard centering rings that they list in the instructions. I used Tite-bond glue throughout and have not had any problems. There is one "gotcha" in the instructions. When attaching the fins, they are supposed to be placed 3/16" from the back end of the tube. I missed this and know one other person who did the same thing. I recommend you mark your tube before you apply the fins in order to get them even.
Finishing:
The finishing instructions are detailed and good. I painted all the tubes instead of leaving
the yellow tube plain as the instructions show. It is very important that you put the launch lug in the location shown
on the instructions so that it does not interfere with the roll marking decals. Also, do not put the "US Army
decal opposite the launch lug, or you can't put the second logo on (It will overlap the launch lug).
Overall a very easy kit to build that looks great stock.
Construction Rating: 4 out of 5
Flight:
This rocket flies great, but stay away from the small motors. I tried an A8-3 once and nearly
had a heart attack. The rocket barely cleared 25 ft and tailslid until ejection about 5 feet from the ground. It was
undamaged, but I never did that again. B6-4's and C6-5's work great. I have now flown this rocket more than 25 times
and it is still a great flyer. I have won two random duration contests with it since, on a C6-5 it flies 43-48 seconds
and the two contests I entered were 45 and 50 second times.
It is my favorite Estes rocket.
Recovery:
The only problems I have had with recovery are that after about ten flights, the shroud
lines started coming untied. I finally went back and retied them and added drops on glue to the knots. i have had no
trouble since. I had one ejection failure on flight 22 on a very cold day and the chute stuck in the tube. The rocket
came in ballistic, with the nose cone flopping and crushed the end of the tube. I was able to straighten it out and
have flown it successfully since. I am still on the original chute and shock cord and over 25 flights.
Flight Rating: 4 out of 5
Summary:
This is a quality rocket that looks and flies great. I would like the decals to be water-slide
and would recommend they delete the A8-3 and B4-4 motors from the motor list. Otherwise it is a great rocket.
Overall Rating: 4 out of 5
Other:
This rocket shows that if you build an Estes rocket per the directions and take care of it you
can fly it reliably for over 25 flights, and I'm still counting. This is one of my favorite rockets.
After dodging temptation for several years, a deal on a Hobby Lobby clearance rack that I couldn't pass up made me the proud owner of an Estes Patriot M104 missile. I originally bought it figuring that I'd find a use for the nose cone on another project, but as often happens when things lay around the shop, I eventually opened it up and built it. Never one who cared for the ...
I built this as part of the EMRR Challenge #7 as outlined I built this exactly as the instructions specify and then built a second with my own modifications. This rocket is a Semi-Scale version of the US Army Patriot Air Defense Missile. The rocket is designed to use an 18mm engine and 12" parachute recovery. 2 – BT-60 White Body Tube (6.625” Long) 1 - Yellow Body Tube ...
Sponsored Ads
B.S. (July 10, 2010)