Construction Rating: | starstarstarstarstar_border |
Flight Rating: | starstarstarstarstar |
Overall Rating: | starstarstarstarstar |
Diameter: | 1.64 inches |
Length: | 21.20 inches |
Manufacturer: | FlisKits |
Skill Level: | 3 |
Style: | Cluster, Sport |
Brief:
Just another quick review of The Rocketry Forum's favorite kit...large fins, 2 canted 18mm motors, 'nuff said!
Construction:
I won't repeat all of this information, I'll just be pointing out what I think are the high points, assuming you have read the other reviews, above.
The parts are all of good quality, and the laser cut fiber motor mount components make assembly easy. With a balsa nose cone, and cut-them-yourself fins remind me of the 'old days'. The only change I made was adding a leader of Kevlartwine that I epoxied to the motor mount before its insertion.
Finishing:
I strengthened the tip of the cone with thin CA and filled all balsa surfaces with Fill-N-Finish. The cone looks nice and is relatively hard, but the surface is rougher than most. This required an extra filling cycle, but the end result is great. The only other issue is that the proximity of the motor mounts makes masking the fins a bit tricky. I painted mine sort of like the packaging shows, using Testor's Sapphire and Lime-Gold Metal Flake paint. The Testor's paints really look nice.
Construction Rating: 4 out of 5
Flight:
As with most model rockets, I used dog barf wadding wrapped in a layer of Estes wadding. No motor hooks are provided, so I wrapped the motors in masking tape. I flew my Deuce on 2xB6-4, 2xC6-3, 2xA8-3, and 2xC6-5, in that order. All were great flights - the logs are below. Oddly, on the flight on the C6-5s, it unexpectedly turned slightly with the wind at about 100'. Must have hit a gust.
Recovery:
On the first 2 flights, I lost shroud lines, so I replaced the 'chute with a nylon one for the subsequent flights. The Kevlar/elastic shock cord kept the nose well away from the body. No 'smiles' here.
Let's see, take away a point for the 'chute, and half a point for the lack of a Kevlarleader. Add back in 2 points for being totally cool, and you get a flight rating of 5.5. Oops, can't go over 5 :-).
Flight Rating: 5 out of 5
Summary:
Cool looks, cool flights with dual smoke trails...5 points! BTW, someone else at the launch is building a 24mm upscale.
Overall Rating: 5 out of 5
This is a skill level 3, two engine canted cluster rocket. The Duce has one body tube and uses four fins. It comes with a very nice balsa nose cone and two parachutes. The motor mount is unique but goes together easily and works great. Two pre-cut engine mounting rings are included with in the hardware. A BT-60 body tube is supplied in the kit as well as 30" of thin shock cord. The 1/8" ...
The Deuce's Wild! is (in my opinion) one of the most innovative kits available at the moment and will undoubtedly become a classic. It's unique point is the dual smoke trails from the canted motors, a great spectacle that grabs anyone's attention. The moment I saw the Deuce (when FlisKits first opened), I wanted one and soon set about trying to bring them to the UK...this basically involved ...
Brief: The Deuces Wild is a very unique model rocket from FlisKits, a newer company on the block in the model rocket industry. The Deuce boasts a cluster using dual 'canted' 18mm motors, which gives it a really cool look both on the pad and in the air. The model came in a plastic bag, similar to Estes Rockets, but that is where the similarity ends. Inside the bag was a real balsa nosecone, ...
(by Jason Toft - 04/15/03) Brief: An awesome little rocket with dual canted motor mounts. Just BEGGING to be upscaled Construction: When I received my Deuce, there was one 17 inch BT-60 tube, a balsa ogive nose, fin stock, motor mount materials, and other miscellaneous materials required for construction. (launch lugs, chute, etc.) I opened the package and inspected the quality ...
Dual Canted 18mm motor mounts. Designed to produce two distinctive smoke trails when launched. The Deuce's Wild comes with Estes quality parts. The Body tube is BT-60 sized, and is topped with a nice Balsa nosecone. The kit includes two 18mm motor tubes, and two thrust rings. No motor hooks are provided. Two sheets of balsa is used to cut out the four large fins form the pattern provided. The ...
Sponsored Ads
J.F. (October 2, 2002)