Pratt Hobbies EIGHTPACK

Pratt Hobbies - EIGHTPACK

Contributed by Duane Boldt

Published: 2010-05-29
Manufacturer: Pratt Hobbies

(Contributed - by Duane Boldt - 05/29/10)Pratt Hobbies Eight Pack

Brief:
Pratt Hobbies makes a real nice multiple pad launch controller for a reasonable price. They sell the SIXPACK regularly on their site. My kids' school needed a controller for their classroom and rocketry club launches. We had build two 4 pad racks and wanted an 8 pad controller. Doug at Pratt Hobbies came through, even while he was busy getting ready for a trip, and knocked out an 8 pad version for us in time for our big day of launching 300+ rockets. Great customer service.

Construction:

  • Control box with 8 clearly numbered stations.
  • 8 arming switches
  • 8 continuity lights
  • 8 Nice big red launch buttons
  • Master power switch with RCA connection key on retracting clip
  • Quick disconnect power cables with clamps to connect to battery or jump starter
  • 8 extension cords with clips

** User supplies inexpensive standard extension cords in their desired length to go from the controller to the shorter cords with clips that are supplied.

What's IncludedUser Supplied Toolbox for Cords
Supplies CordUser supplied EExtension Cord with Included Cord

The Pratt Hobbies' SIXPACK/EIGHTPACK is very easy to use and very convenient for club and classroom launches. It is a nice compact unit that has performed flawlessly for hundreds of launches.

Our school's rocketry club can now launch rockets for three classrooms at a time and keep 80+ kids busy. We added the EIGHTPACK with a home built 4 pad launcher and use three 4 pad racks.

Eight Pack in Action!Eight Pack in Action!

We use portable automitive "Jump Starters" for power. They provide nice clean power and have come in handy when way out at a club launch and someone has a dead car battery... If you get one with a built in air compresser you can also use it with water rockets.

The only thing I would have done differently in contructing ours would be to have used three prong extension cord parts. That way, 2 or 3 prong cords could be used. We had already bought 3 prong outdoor extension cords before the box arrived. We just used a hacksaw to remove the "pole" from the male end and they have worked fine.

I'm sure Pratt would have done it any way we wanted. I had failed to mention that we had already bought 3 prong cords.

Construction Rating: 4 out of 5

Eight Pack in Action!Eight Pack in Action!

Summary:
I highly recommend the Six Pack launch controller (or Eight Pack or higher is you have them build a custom controller).

They build quality products and are very accomodating and easy to work with.

They came through for us when we need a controller fast and helped us get a successful launch off on a short deadline.

For our Eight Pack I knocked off 1/2 point because of the 2 prong cords.

Overall they are great controllers and worth the cost, especially for schools and clubs.

Overall Rating of Eight Pack with 2 Prong Connections: 4 out of 5

Eight Pack in Action!Eight Pack in Action!

The Pratt Hobbies' Six Pack is pictured below:

Six Pack

Overall Rating of Six Pack with 3 Prong Connections: 5 out of 5

comment Post a Comment