CP Method: | Rocksim/Rocksim |
CP Position From Front: | 10.26 inches |
Decals: | Waterslide |
Diameter: | 0.95 inches |
Fin Material: | Balsa |
Length: | 12.00 inches |
Manufacturer: | Custom Rockets |
Model: | 10024 |
Motor Size: | 18 millimeters |
Nose Cone Material: | Plastic |
Power: | Low-Power |
Product Type: | Kit |
Recommended Motors: | 1/2A6-2, A6-4, A8-3, B4-4, B6-4, C6-5, C6-7 |
Recovery: | Parachute |
Skill Level: | 1 |
Status: | In-Production |
Style: | Sport |
Weight: | 0.80 ounces |
Brief This is a Skill Level One rocket with balsa wood fins, a single body tube, and a plastic nose cone. Components The parachute is a 12-inch plastic ‘chute with an elastic shock cord. The fins are die-cut and were almost ready to fall out, cleanly cut and clear. There is also a double-sided sheet of instructions. The "anchor" for the shock cord must be cut from the ...
This is a sharp-looking red/white/blue rocket by Custom, very good introductory kit, and a great flyer. The kit I built is an older style from about 1995. The main differences between this kit and the current version is that the mylar chute has been replaced by a plastic Estes-style chute, and the nose cone screw eye has been replaced by a hook cast into the nose cone. The rocket consists ...
Basic 4FNC Skill Level 1 rocket. The kit contains: Body Tube BT-50, 9" long Plastic Nose cone Die-cut Balsa Fins 12" poly chute standard 18mm engine mount w/ hook 1/8" x 16" elastic shock cord 1/8" x 1-3/8" launch lug Water-slide decals Quality of materials was uniformly excellent. Instructions and illustrations were clear and straightforward. ...
Sponsored Ads