Estes - Black Brant II Kit
| CP Method: | Rocksim/Rocksim |
| CP Position From Front: | 21.37 inches |
| Decals: | Waterslide |
| Fin Material: | Balsa |
| Length: | 24.88 inches |
| Manufacturer: | Estes  |
| Model: | 1958 |
| Motor Size: | 24 millimeters |
| Nose Cone Material: | Plastic |
| Power: | Low-Power |
| Product Type: | Kit |
| Production Years: | 1986-1998 |
| Recommended Motors: | C11-5, D12-5, D12-7 |
| Recovery: | Parachute |
| Skill Level: | 4 |
| Status: | Out-Of-Production |
| Style: | Scale |
| Weight: | 2.29 ounces |
Reviews
- Estes Black Brant II By Casey Thomas Bartlett
Brief: This is a good, clean, single staged rocket which uses an 18" plastic parachute for recovery. Construction: There is a single body tube, with three fins. The construction is very simple, and the design is very basic. The construction was fairly simple with an overall basic design. The Estes instructions were very thorough, and I was not confused at any point. The ...
- Estes Black Brant II By Erik Turner
Brief: This model is a scale model of a Canadian Atmospheric Research Vehicle. It has a single Estes parachute. Construction was fairly easy, except for one part. In making the motor mount, I made some mistake (can't remember) and had to rip the mount out. I would suggest being careful in making the mount especially when this model is the first friction fit kit you have ...
Rocksim Design Files
Plans and Instructions
 |
 |
Flights
Sponsored Ads
|
|