This kit is recommended for the experienced modeler.

Length: 87”

Diameter: 4”

Body Tube: Kraft air-frame,4”x 34”booster section,4”x 17” mid section,4”x 17” payload area.

Fins: 1/4” 5-Ply Baltic birch ( 6- fins 3 upper and 3 lower )

Engine Mount: 54 mm x 34”

Weight: 4-6 lbs

Recovery: 60” Ripstop nylon chute

Additional info:This rocket kit is through the wall fins. Includes plastic nose cone from RWW, airframe tube is a kraft paper with a glassine finish, and this will allow you to just prime and paint your rocket. Motor tube and coupler are kraft tubing as well. Fins are Baltic birch fins are sanded to a matching set. 1/4” Baltic birch bulk plate, centering rings.1010 rail buttons, a 10’ and 20’ nylon webbing shock cord that will attached to quick links that attach to the eyebolts that are fastened to the avionics bulk plate and centering ring. Parachute made from nylon rip-stop, all kits also include instruction guide with full illustrations. All kits are tested with stringent flights to assure the reliability of your rocket kit. All kits include precise long life computer-cut vinyl decals to match the Prototype.