× We have recently moved to a new server. If you run into any issues, please let us know through the Contact Us link at the bottom of the page. Thanks for visiting RocketReviews.

All Rocketry Blogs

Sport Rocketry / Components / Recovery / Streamer

    High Power Rocketry: Mylar streamers 2 x 41 inches (2012-02-29)
    The rocketry bender continues with two mylar streamers. I intend to use these on mid and high-power flights. The plan is to increase visibility with sporadic flashes from the streamer. If it works, ... [Read More]

    Model Rocket Building: Streamer Material? TIPS (2014-03-29)
    From the Rocketry Forum: Gary Byrum   OldSchoolDood "Go to Lowe's and get you a roll of the unprinted Barricade Tape or safety tape. It's 1"- 3" wide about 100 miles long ( jk ) and ... [Read More]

    Model Rocket Building: Streamer Recovery On Engine Eject Models TIP (2015-07-23)
    Scott Johnson reminded of an engine eject streamer recovery method from Centuri. In the Satellite Killer model, Centuri used the empty space in a 1/2A6-2 engine for a streamer! I found the ... [Read More]

    Model Rocket Building: Ribbed Streamers TIP (2015-10-26)
    On the Rocketry Central Forum I asked Dave from Hot Rod Rockets where he got the ribbed Mylar streamers used in his kits. Here's his response: - Ribbed streamers....  Well  here's more ... [Read More]

    Rocket N00b: Micropost: Chute or Streamer - Decisions (2016-09-13)
    Sometimes it's hard to decide whether to use a parachute or a streamer for recovery. A chute will bring the rocket down nice and softly, but more slowly. In that time, the wind may cause the rocket ... [Read More]

    Model Rocket Building: Lonnie B's Streamer Attachment TIP (2017-02-07)
    Lonnie B. showed me his method for attaching a streamer to a shock cord. This is so much stronger than what I've been doing - using just a reinforcement disk stuck on both sides of the streamer. ... [Read More]

    Model Rocket Building: Streamers - Food For Thought (2019-02-01)
    Streamers were mentioned in a Facebook post. In a response, Bradley Lawrence Smith said he uses Kite Tails for streamers. At ROCK club launches, I've always like the streamer Tom Dennon uses. It's a ... [Read More]

    Thrifty Rocketeer: Ring Binders (2020-11-09)
     The Thrifty Rocketeer blog continues.... Here's a quick one for you low power guys and gals. Have you ever made a low power rocket that used a streamer? Typically these days, the ... [Read More]

    Thrifty Rocketeer: Streaming Yellow Zonkers! (2020-12-20)
      The Thrifty Rocketeer blog continues... Here's a really short tip for those of us low power guys:      So, one of your favorite kit  builds contains an old ... [Read More]

    Thrifty Rocketeer: Streamers and other delights (2023-05-22)
     The Thrifty Rocketeer blog continues... Well, it happened just yesterday.     Our rocketry club FINALLY hit the weather right, and a handful of dedicated rocketeers ... [Read More]