The Galaxy Probe 1 is a 24mm rear ejection rocket that is a combination of paper tubes, carbon fiber rods and balsa. I built it to look like some of the long, deep space ships I have seen in pictures and movies.
Flight Date: | 2012-06-13 |
Rocket Name: | Galaxy Probe 1 |
Flyer's Name: | SteveL |
Motors: | E18-7 drilled off 2 seconds |
Expected Altitude: | 600 Feet |
Wind Speed: | 5.00 mph |
Launch Site: | Home |
Good 1st flight, went straight up. Delay was a bit long, had drilled 2 seconds off of a 7 second delay but still to long, but had a good recovery. Rear ejection worked fine.
Stage | Motor(s) |
---|---|
1 | Aerotech E18-7 |
Sponsored Ads