Estes - Trajector - Rocksim Design File

Designs >> Rocksim Library >>

Estes - Trajector Rocksim Design File

Comments: 1. This is a stock Estes kit with the addition of upgraded recovery parts and ommision of engine block: 300# Kevlar 1st shock cord fastened to motor mount, stock Estes shock cord tied to end of Kevlar cord. 9" x 9" Nomex blanket heat shield Snap swivels and jump rings for fastening shock cord and parachute to nose cone Engine block not installed to accommodate Aerotech 29mm RMS motor - uses screw retainer only 2. The Rocksim DB for 1/2" elastic seems very low. I adjusted my materials from .0028 to .0104 ox/in. This resulted calculated weight that was very close to the measured weight of 27.92 g for the stock shock cord. The Rocksim default number is 21 grams less than that; if you keeo it I suggest adding a mass weigt to add the extra amount in. 3. Some of the diamteres or thicknesses may seem a little off. I weigh every component of a kit before I start building, subassemblies after I glue and paint, and the final model so that the simulaiton weight is within a few grams of the finished model weight. I like using calculated mass as much as possible, so where I can avoid using mass override by slightly adjusting the diamater of a part, I will take that option.

Designer: Estes Modeled by Glenn Pohly May 6 2016

Download Estes Trajector Pro.rkt

To use the design file above, you need a copy of Rocksim, a rocket design and simulation program.

Kit Name: Estes - Trajector {Kit} (9709)
Diameter: 2.0000 inches
Length: 35.3000 inches
Style: Futuristic/Exotic

Parts Breakdown

Estes - Trajector Ogive Nose Cone

Custom Mass Object

Custom Estes BT 1090 1.0173 inches 25.84 mm 0.7250 inches 18.42 mm 0.7250 inches 18.42 mm 0.9500 inches 24.13 mm 0.9500 inches 24.13 mm 0.2400 inches 6.10 mm 0.0000 inches 0.00 mm 1.5950 inches 40.51 mm 2.5550 inches 64.90 mm 1.8000 inches 45.72 mm 1.5200 Body Tube [Length: 25.30 in]

Estes - Trajector Trapezoid Fin Trapezoid Fin Set

External Pod

Estes - Trajector Elliptical Nose Cone

Custom Estes BT 1090 1.0173 inches 25.84 mm 0.7250 inches 18.42 mm 0.7250 inches 18.42 mm 0.9500 inches 24.13 mm 0.9500 inches 24.13 mm 0.2400 inches 6.10 mm 0.0000 inches 0.00 mm 1.5950 inches 40.51 mm 2.5550 inches 64.90 mm 1.8000 inches 45.72 mm 1.5200 Body Tube [Length: 0.12 in]

Custom Ring

Custom Estes BT 1090 1.0173 inches 25.84 mm 0.7250 inches 18.42 mm 0.7250 inches 18.42 mm 0.9500 inches 24.13 mm 0.9500 inches 24.13 mm 0.2400 inches 6.10 mm 0.0000 inches 0.00 mm 1.5950 inches 40.51 mm 2.5550 inches 64.90 mm 1.8000 inches 45.72 mm 1.5200 Body Tube [Length: 0.34 in]

Custom Estes BT 1090 1.0173 inches 25.84 mm 0.7250 inches 18.42 mm 0.7250 inches 18.42 mm 0.9500 inches 24.13 mm 0.9500 inches 24.13 mm 0.2400 inches 6.10 mm 0.0000 inches 0.00 mm 1.5950 inches 40.51 mm 2.5550 inches 64.90 mm 1.8000 inches 45.72 mm 1.5200 Body Tube [Length: 0.34 in]

Custom Estes BT 1090 1.0173 inches 25.84 mm 0.7250 inches 18.42 mm 0.7250 inches 18.42 mm 0.9500 inches 24.13 mm 0.9500 inches 24.13 mm 0.2400 inches 6.10 mm 0.0000 inches 0.00 mm 1.5950 inches 40.51 mm 2.5550 inches 64.90 mm 1.8000 inches 45.72 mm 1.5200 Body Tube [Length: 0.34 in]

Custom Elliptical Transition

Custom Mass Object

Custom Mass Object

Custom Mass Object

Custom Rip stop nylon Parachute (20.00 in)

Custom Launch Lug

Custom Launch Lug

Custom Estes BT 1090 1.0173 inches 25.84 mm 0.7250 inches 18.42 mm 0.7250 inches 18.42 mm 0.9500 inches 24.13 mm 0.9500 inches 24.13 mm 0.2400 inches 6.10 mm 0.0000 inches 0.00 mm 1.5950 inches 40.51 mm 2.5550 inches 64.90 mm 1.8000 inches 45.72 mm 1.5200 Body Tube [Length: 5.00 in]

Custom Ring

Custom Ring

Custom Ring

Custom Ring

Estes - Trajector Trapezoid Fin Trapezoid Fin Set

External Pod

Estes - Trajector Elliptical Nose Cone

Custom Estes BT 1090 1.0173 inches 25.84 mm 0.7250 inches 18.42 mm 0.7250 inches 18.42 mm 0.9500 inches 24.13 mm 0.9500 inches 24.13 mm 0.2400 inches 6.10 mm 0.0000 inches 0.00 mm 1.5950 inches 40.51 mm 2.5550 inches 64.90 mm 1.8000 inches 45.72 mm 1.5200 Body Tube [Length: 0.12 in]

Custom Ring

Custom Estes BT 1090 1.0173 inches 25.84 mm 0.7250 inches 18.42 mm 0.7250 inches 18.42 mm 0.9500 inches 24.13 mm 0.9500 inches 24.13 mm 0.2400 inches 6.10 mm 0.0000 inches 0.00 mm 1.5950 inches 40.51 mm 2.5550 inches 64.90 mm 1.8000 inches 45.72 mm 1.5200 Body Tube [Length: 0.34 in]

Custom Estes BT 1090 1.0173 inches 25.84 mm 0.7250 inches 18.42 mm 0.7250 inches 18.42 mm 0.9500 inches 24.13 mm 0.9500 inches 24.13 mm 0.2400 inches 6.10 mm 0.0000 inches 0.00 mm 1.5950 inches 40.51 mm 2.5550 inches 64.90 mm 1.8000 inches 45.72 mm 1.5200 Body Tube [Length: 0.34 in]

Custom Estes BT 1090 1.0173 inches 25.84 mm 0.7250 inches 18.42 mm 0.7250 inches 18.42 mm 0.9500 inches 24.13 mm 0.9500 inches 24.13 mm 0.2400 inches 6.10 mm 0.0000 inches 0.00 mm 1.5950 inches 40.51 mm 2.5550 inches 64.90 mm 1.8000 inches 45.72 mm 1.5200 Body Tube [Length: 0.34 in]

Custom Elliptical Transition

Estes - Trajector Trapezoid Fin Trapezoid Fin Set

External Pod

Estes - Trajector Elliptical Nose Cone

Custom Estes BT 1090 1.0173 inches 25.84 mm 0.7250 inches 18.42 mm 0.7250 inches 18.42 mm 0.9500 inches 24.13 mm 0.9500 inches 24.13 mm 0.2400 inches 6.10 mm 0.0000 inches 0.00 mm 1.5950 inches 40.51 mm 2.5550 inches 64.90 mm 1.8000 inches 45.72 mm 1.5200 Body Tube [Length: 0.12 in]

Custom Ring

Custom Estes BT 1090 1.0173 inches 25.84 mm 0.7250 inches 18.42 mm 0.7250 inches 18.42 mm 0.9500 inches 24.13 mm 0.9500 inches 24.13 mm 0.2400 inches 6.10 mm 0.0000 inches 0.00 mm 1.5950 inches 40.51 mm 2.5550 inches 64.90 mm 1.8000 inches 45.72 mm 1.5200 Body Tube [Length: 0.34 in]

Custom Estes BT 1090 1.0173 inches 25.84 mm 0.7250 inches 18.42 mm 0.7250 inches 18.42 mm 0.9500 inches 24.13 mm 0.9500 inches 24.13 mm 0.2400 inches 6.10 mm 0.0000 inches 0.00 mm 1.5950 inches 40.51 mm 2.5550 inches 64.90 mm 1.8000 inches 45.72 mm 1.5200 Body Tube [Length: 0.34 in]

Custom Estes BT 1090 1.0173 inches 25.84 mm 0.7250 inches 18.42 mm 0.7250 inches 18.42 mm 0.9500 inches 24.13 mm 0.9500 inches 24.13 mm 0.2400 inches 6.10 mm 0.0000 inches 0.00 mm 1.5950 inches 40.51 mm 2.5550 inches 64.90 mm 1.8000 inches 45.72 mm 1.5200 Body Tube [Length: 0.34 in]

Custom Elliptical Transition

Custom Mass Object

What You Can Do

- Link to this Page -

You can link to this page using the following HTML or BB Code.

Text Link in HTML (for web sites)

<a href="https://www.rocketreviews.com/rocksim-929764.html">Estes - Trajector - Rocksim Design File</a>

Text Link in BB Code (for forum posts)

[url=https://www.rocketreviews.com/rocksim-929764.html]Estes - Trajector - Rocksim Design File[/url]

Select the appropriate text with your mouse then "right-click" and select "Copy." Then, paste the text into your web site's code or a discussion forum post.