Designs >> Rocksim Library >>

All Rocksim Designs (994 of 3219)

Blackhawk R&D AGM84 Standard ARM (38mm) Rocksim Design File

Comments: Based on actual dimensions of completed model. Both sets of fins have thru the wall tabs to the motor tube as defined by the centering rings. The two sections of body tubes are coupled with a tube coupler and the tube coupler is glued to both. The original design called for a bulkhead 0.5 inches from the rear of the tube coupler with an eye bolt for shock cord connection, the coupler glued to the forward payload section and slip fit into the rear body tube. This design was not adapted as it allows approx. 8 inches of the side strake fins to be exposed when the payload section separates from the rear body tube. A U-bolt in the forward motor mount centering ring is used for shock cord retention via a quick link connector. Fins are beveled on all edges except where attached to body tube.

Designer: Blackhawk R &D

Download oop_blackhawk_agm_84_standard_arm_38mm.rkt

To use the design file above, you need a copy of Rocksim, a rocket design and simulation program.

CG: 39.8438 inches from front
CP: 54.2444 inches from front
Margin: 3.60 Overstable

Parts Breakdown

• Blackhawk R&D AGM84 Standard ARM Nose Cone
• Custom Estes BT 1090 1.0173 inches 25.84 mm 0.7250 inches 18.42 mm 0.7250 inches 18.42 mm 0.9500 inches 24.13 mm 0.9500 inches 24.13 mm 0.2400 inches 6.10 mm 0.0000 inches 0.00 mm 1.5950 inches 40.51 mm 2.5550 inches 64.90 mm 1.8000 inches 45.72 mm 1.5200 Body Tube [Length: 16.00 in]
• Public Missiles Ltd. CT-3.90 Ring
• LOC/Precision Rip stop nylon Parachute (57.87 in)
• Custom Estes BT 1090 1.0173 inches 25.84 mm 0.7250 inches 18.42 mm 0.7250 inches 18.42 mm 0.9500 inches 24.13 mm 0.9500 inches 24.13 mm 0.2400 inches 6.10 mm 0.0000 inches 0.00 mm 1.5950 inches 40.51 mm 2.5550 inches 64.90 mm 1.8000 inches 45.72 mm 1.5200 Body Tube [Length: 36.00 in]
• Blackhawk R&D AGM84 Standard ARM Freeform Fin Set
• Blackhawk R&D AGM84 Standard ARM Freeform Fin Set
• Public Missiles LL-0.38 Launch Lug
• Custom Estes BT 1090 1.0173 inches 25.84 mm 0.7250 inches 18.42 mm 0.7250 inches 18.42 mm 0.9500 inches 24.13 mm 0.9500 inches 24.13 mm 0.2400 inches 6.10 mm 0.0000 inches 0.00 mm 1.5950 inches 40.51 mm 2.5550 inches 64.90 mm 1.8000 inches 45.72 mm 1.5200 Body Tube [Length: 18.00 in]
• LOC Precision LOC CR-3.9-2.14 Ring
• LOC Precision LOC CR-3.9-2.14 Ring
• LOC Precision LOC CR-3.9-2.14 Ring
• LOC Precision LOC CR-3.9-2.14 Ring
• Public Missiles HDWE-UBOLT-SET Ubolt for FNCs Mass Object
• LOC Precision SCTN-20 Tubular Nylon 9/16 In x 20 Ft Mass Object

What You Can Do

• Submit a File Related to this Rocksim Design File
• Submit a Rocksim Design File to RocketReviews.com

- Link to this Page -

You can link to this page using the following HTML or BB Code.

Text Link in HTML (for web sites)

<a href="https://www.rocketreviews.com/rocksim-6071.html">Blackhawk R&D AGM84 Standard ARM (38mm) - Rocksim Design File</a>

Text Link in BB Code (for forum posts)

[url=https://www.rocketreviews.com/rocksim-6071.html]Blackhawk R&D AGM84 Standard ARM (38mm) - Rocksim Design File[/url]

Image Link in HTML (for web sites)

<a href="https://www.rocketreviews.com/rocksim-6071.html"><img src="http://www.rocketreviews.com/rocksim/4919/square_image.jpg"></a>

Image Link in BB Code (for forum posts)

[center]
 [url=https://www.rocketreviews.com/rocksim-6071.html]
  [img]http://www.rocketreviews.com/rocksim/4919/square_image.jpg[/img]
 [/url]
[/center]

Thumbnail Link in HTML (for web sites)

<a href="https://www.rocketreviews.com/rocksim-6071.html"><img src="http://www.rocketreviews.com/rocksim/4919/thumb.jpg"></a>

Thumbnail Link in BB Code (for forum posts)

[center]
 [url=https://www.rocketreviews.com/rocksim-6071.html]
  [img]http://www.rocketreviews.com/rocksim/4919/thumb.jpg[/img]
 [/url]
[/center]

Select the appropriate text with your mouse then "right-click" and select "Copy." Then, paste the text into your web site's code or a discussion forum post.