Estes Star Trooper - Rocksim Design File

Estes Star Trooper Rocksim Design File

Comments: Estes #3031 Rocksim by MMD 11-20-2011 Classic Series release of Centuri KM-3 Note that the tubing coupler supplied with this kit is 1" long. The kit instructions state to install the coupler halfway into each tube. If the kit is assembled in this manner the motor overhang will be 1/2", reducing stability. Inserting the coupler 1/4" into the rear tube allows a more typical 1/4" overhang and a safer stability margin.

Designer: Centuri

Download Centuri Star Trooper (Estes version).rkt

To use the design file above, you need a copy of Rocksim, a rocket design and simulation program.

Parts Breakdown

Estes Star Trooper #3031 Ogive Nose Cone

Estes 038251 Screw Eye Mass Object

Custom Estes BT 1090 1.0173 inches 25.84 mm 0.7250 inches 18.42 mm 0.7250 inches 18.42 mm 0.9500 inches 24.13 mm 0.9500 inches 24.13 mm 0.2400 inches 6.10 mm 0.0000 inches 0.00 mm 1.5950 inches 40.51 mm 2.5550 inches 64.90 mm 1.8000 inches 45.72 mm 1.5200 Body Tube [Length: 4.00 in]

Estes Paper Streamer (0.0060 in)

Estes 038365 Shock Cord 12in Mass Object

Custom Estes BT 1090 1.0173 inches 25.84 mm 0.7250 inches 18.42 mm 0.7250 inches 18.42 mm 0.9500 inches 24.13 mm 0.9500 inches 24.13 mm 0.2400 inches 6.10 mm 0.0000 inches 0.00 mm 1.5950 inches 40.51 mm 2.5550 inches 64.90 mm 1.8000 inches 45.72 mm 1.5200 Body Tube [Length: 1.75 in]

Estes Paper Ring (0.4500 - 0.5200 in)

Estes ESTES 2321 Launch Lug

Custom Balsa Freeform Fin Set

Estes Paper Ring (0.5400 - 0.5630 in)

What You Can Do

- Link to this Page -

You can link to this page using the following HTML or BB Code.

Text Link in HTML (for web sites)

<a href="https://www.rocketreviews.com/rocksim-220608215954.html">Estes Star Trooper - Rocksim Design File</a>

Text Link in BB Code (for forum posts)

[url=https://www.rocketreviews.com/rocksim-220608215954.html]Estes Star Trooper - Rocksim Design File[/url]

Select the appropriate text with your mouse then "right-click" and select "Copy." Then, paste the text into your web site's code or a discussion forum post.