CLICK PICTURE TO GET FULL SIZE
  |
 |
 |
Pic 28: Front Cover
The 29mm hole is cut only in the upper section. |
Pic 29: Front Cover The pieces of Basswood are cut to size and shaped to conform with the body of the rocket. The angles are the slant on the 1st Canopy (pic #2) |
Pic 30: Motivation Shot No, the top fin is still not glued in. |
 |
 |
 |
| Pic 31: Parachute Mounts The eye-screws are positioned so that they go into the openings on the sides of the canopy. The screws were CA'd into the wood and then back-filled with epoxy. |
Pic 32: Parachute Compartment Here's where the size and weight become a problem. I can fit a 24" parachute into the side compartment, I need a 30" for just the nose cone. I'm looking for a thin parachute. |
Pic 33: Parachute Compartment The plan is for the left parachute to be for just the nose cone and the right for the body of the rocket. |