×
We have recently moved to a new server. If you run into any issues, please let us know through the Contact Us link at the bottom of the page. Thanks for visiting RocketReviews.
Model Rocket Building Blog 
Model Rocket Building Posts
Rocketry Product: Excelsior Rocketry - Honest Goon {Plan}
Honest Goon - Refinish Part 1, Old Decal Removal (2013-09-09)
Here's a great small field flyer and a favorite Goony- The HONEST GOON! You can get the decals and plan set from Excelsior Rocketry HERE The builder must supply a Baby Bertha kit, a BT70AJ, a ... [Read More]
Honest Goon - Refinish Part 2, Decal Removal & Surface Prep (2013-09-10)This nose cone section is bigger than you'd think! After the decals were either lifted with tape or sanded off with 400 grit, here's what I was left with. The primer is starting to show, probably ... [Read More]
Honest Goon - Refinish Part 3, Nose Cone Black Trim (2013-09-11)I had to divide the nose cone in 12 equal spacings. A strip of paper was wrapped an marked. This was folded in two, those two halves folded in thirds and sixths. Pencil ticks were made at all the ... [Read More]
Honest Goon - Refinish Part 4, Black Fin Quarters (2013-09-12)Instead of masking and spraying the black, I though I'd try something different. The fins are square with no rounded edges. The body tube is a smooth surface. The Contact Paper just might work ... [Read More]
Honest Goon - Refinish - Finished (2013-09-13)The Honest Goon looks better with the alternating black/white fin quarters. The four spin rockets on the nose cone were drawn to look a bit more 3D. The fin fillet seam ... [Read More]
Sponsored Ads
