A modified stock Quest kit.
Rhe upswept fins were flipped over to give it a more traidional look. The fin tips were clipped and the square tips rounded.
The body tube was shortened by two inches.
Red monokote trim pieces were added to the fins and body tube.
The 14" parachute was trimmed down to 12" and a large spill hole cut in the center.
Flight Date: | 2013-07-06 |
Rocket Name: | Quest Viper |
Kit Name: | Quest - Viper {Kit} (5594) |
Flyer's Name: | Hans "Chris" Michielssen |
Motors: | A6-4 |
Expected Altitude: | 275 Feet |
Wind Speed: | 5.00 mph |
Launch Site: | Schoolyard Soccer field |
Actual Altitude: | 250 Feet |
Typical loud Quest engine noise.
A smaller parachute with spill hole brought it back close.
Stage | Motor(s) |
---|---|
1 | Quest A6-4 |
Sponsored Ads
![]() |
![]() |