× We have recently moved to a new server. If you run into any issues, please let us know through the Contact Us link at the bottom of the page. Thanks for visiting RocketReviews.

All Rocketry Blogs

Sport Rocketry / Rocketry Products / Odd'l Rockets / Kits / Cutaway Engine

    Model Rocket Building: Cutaway Engine Background (2018-10-29)
    Here's the Cutaway Engine I remember, it was there in the 1970 Estes catalog but I never ordered one. Here's a picture of that Cutaway Engine I found on Ebay. Pretty rough, it even has band saw ... [Read More]

    Model Rocket Building: Odd'l Rockets Cutaway Engine Build, Part 1, Parts (2018-10-30)
    Here's what the PDF looks like. It prints out on 65 lb. card stock. You'll also need a 6 1/2" long piece of BT-60. Tools: Sharp knife, wood glue, glue stick, straight edge, butter knife with no ... [Read More]

    Model Rocket Building: Odd'l Rockets Cutaway Engine Build, Part 2, Pre-Fold Embossing (2018-10-30)
    Cut the 6 1/2" long BT-60 tube in half, lengthwise. Smooth the cut edges with a sanding block with 220 grit. The dashed lines are embossed with a dull butter knife and straight edge. Pick a butter ... [Read More]

    Model Rocket Building: Odd'l Rockets Cutaway Engine Build, Part 3, Rounding Over End Folds (2018-10-31)
    The end cap on the left has been folded. Fold the triangles under with your fingers first. The triangle corners can be rounded a bit more by rolling over the corners with the burnisher. Round out ... [Read More]

    Model Rocket Building: Odd'l Rockets Cutaway Engine Build, Part 4, Gluing It Together (2018-10-31)
    Test fit the end caps without glue to get an idea how they fit the curved ends. Spread a thin coat of wood glue around the tube end and slide the end cap from the inside towards the outside edge. ... [Read More]

    Model Rocket Building: Odd'l Rockets Cutaway Engine Build, Part 5, Labels & Finished (2018-11-01)
    The labels are optional, they are set above the cutaway model to show their position. Use a pencil tip or sharpened dowel to hold down the labels when applying the glue stick. Here's the finished ... [Read More]

    Wayne Hill's Blog: Two new builds from Chris Michielssen (2018-11-04)
    More great downloadable paper rocket builds from Chris Downscale Red Max Downscale Red Max Model of Cut-away Engine Cutaway Engine PDF More of Chris Michielssen’s  rockets here ... [Read More]

    Model Rocket Building: Odd'l Cutaway Motor On Display (2018-11-29)
    From Richard Holmes Rich's Rockets Blog: "Today was the Saturday before Thanksgiving, which meant Walt’s HobbyTown’s Secret Santa Sale and Open House, which meant Syracuse Rocket Club on ... [Read More]