×
We have recently moved to a new server and are aware of issues with some images, the Rocksim library, and creating a new account. If you run into any other issues, please let us know through the Contact Us link at the bottom of the page. Thanks for visiting RocketReviews.
Banana Bitch
By David Frey
2023-04-15
Using my 3D printer, I printed the nose cone and fin can from a file on Thingiverse (https://www.thingiverse.com/thing:2840419).
Added:
- Kevlar thread shock cord
- 12" Parachute
No motor retainer so the motor needed some masking tape on the backend to keep it in place.
Note: On the maiden flight, the fin can deformed due to motor heat. You may need to extend the motor 1.5 cm from the end to reduce melting or print in ABS/PETG.
Sponsored Ads
 |
 |