3d Printed A4/V2 2.6" dia. Model rocket
By Levi Willey
2023-07-20
I just built this V2 rocket using 3d printed parts. The files for the parts are here on thingiverse: https://www.thingiverse.com/thing:791346 I posted lots of pics to show the progress. I hope to fly this rocket this weekend on an E20W. Will probably post a launch video soon!
Parts
Body glued together
Lower and upper fincan pieces glued together and a stiff foamboard centering ring I cut out was also added.
Body and Fincan glued together
Body and fincan glued together shown w/ nosecone
Painting it with these colors
Finished painting pic 1
Finished painting pic 2
Finished painting pic 3
Finished painting pic 4
3d printed V2 (camo) shown w/ my estes V2 (yellow/black)
Sponsored Ads
 |
 |